Blue Sata Port On Motherboard

Close up of external hard disk drive for connect to laptop, transfer or backup data between computer and hdd. Ok you have a bad sata port and everthing else is fine.

ASUS Maximus VII Hero Review and Unboxing Digital Storm

The blue colored sata2 port is open.

Blue sata port on motherboard. Identifying the sata ports on your desktop board. So i shutdown the system, moved the sata cable to a different sata port for that drive. Booted the system, and the drive was there.

In motherboard, it has 15 pins. Hp used to use the dark blue color to designate a sata iii, 6gb data transfer rate port reserved for the primary boot drive. The meaning of the colors:

Since most atx/sata power supplies have two or more plugs on each leg that pretty much rules out a problem there if either plug works. Very possible for not all of the conductors in the sockets on the motherboard are working as designed. What do you wanna here?dude you're starting to get a reputation of arguing for the sake of it.

I moved the cable back to the original port (this is sata0, blue port on the dell motherboard), booted up and the drive was there, back on the original port. There are (5) sata ports on the internal motherboard. The motherboard only allows me a raid with only 4 disks and never sees the.

So check out the manual. But your pc was introduced by hp in 2016. Therefore, you should connect modern hard drives to the blue sata port.

Sata ii ports ran at the slower speed of 3gb/sec. Refer to the images below to help you locate the serial ata (sata) ports on your desktop board and determine if any of the sata ports are affected by the chipset circuit design issue. Usually the 2 avaiable (fewer) are the 6gb/s but it really depends on your motherboard.

I have installed an additional tuner for a total of two. 1 dvd player and n.1 boot disk (512gb). If there's only one hard drive installed, could you move the hard drive to the other 3.5 bay.

I simply don't know if it's common for a sata port to go bad but the rest of the pc to be fine. All sata ports on your pc's motherboard could be sata iii ports. Sata 3 or 6 or even a different sata chipset.

Plug and play hard drive features. In this situation, the sata port you choose will matter. V) sata power supply modern hard drives and cdrom uses sata cable for power.

N 6 disks (4tb) in raid 10 or in raid5. I'd like to note that in real world applications, there's no difference between using ssds with 3 or 6 gb/s ports. Instructions for how to use windows* device manager to determine if you have one of the impacted intel® 6.

In case if the sata ports conform to different version, then they may be color coded. Dell x501h studio xps 9000 435t lga1366 intel x58 + ich10r ddr3 series motherboard. Some times that disables certain sata ports i think no m.2.

Your primary drive, or if you have a sata ssd, would go in to the sata 3 ports ideally. Then use the other ports for optical drives. Older hp pc's had a mix of sata iii and sata ii ports.

I'm asking the question as to whether or not people are using the white sata ports and is there a true performance difference over the blue ports. This motherboard has four sata 2 ports (blue colored) and 2 sata 3 ports (white colored). If you are installing multiple hard drives, but installing the operating system on only one drive, use the lowest numbered port on the motherboard (sata0 or sata1) for this.

The motherboard (dx58so2) has n.6 (black) sata (3.0 gb) connectors and n2 (blue) sata (6.0 gb) connectors. I have an hp media center m7077c that i am setting up for my wife. So for instance, in the motherboard above, the white ports conform to the newer sata 3 interface while the blue ports conform to the older sata 2.

Some sata ports are 6 gb/s and some are 3 gb/s. I think i know the meaning of blue; The blue sata connectors point to the fastest transmission traffic of 6 gbit/s.

If you have a mix of sata version, the ports corresponding to a generation will. There's also the conductors on the motherboard itself and the controller for the sata ports. Hence, here it matters which port you use.

Broken link has been removed from this post by dell> bev. If you have an old motherboard (5 or more years old) then in that case you may find a mix of sata 2 and sata 3 ports. These are also backward compatible.

Just wondering if it makes any difference which sata port the dvd drive is plugged into. I know what the specs are, but all of the guides tell you to put the dvd in sata port 0 and the hd in 1. Black hard disc for backup files and important information using usb 3.0 connection close up of external hard disk drive for connect to.

If you are installing a single sata hard drive, it is best to use the lowest numbered port on the motherboard (sata0 or sata1). It has colors on the sata connectors on the main board, blue, black, yellow, white. What is the significance of the colors?

On the motherboard there is, depending on the manufacturer, up to three different colored sata ports (blue, red, and black). 10) sata and pata port and connector

Used, BIOSTAR TP75 desktop motherboard B75 LGA 1155 i3 i5